Leqephe la Faeba ea Khabone e Mebala - Matla a Phahameng, Botle le Motsoako o Bobebe

Likaroloana

• 'Mala o khanyang, o tšoarellang nako e telele: Theknoloji e tsoetseng pele ea ho taka e netefatsa hore 'mala o potlaka, o tsitsitse ka UV, ha o fifale tlas'a khanya ea letsatsi kapa tikoloho e thata; ho na le likhetho tsa mebala tse ka fetoloang.
• Motheo oa Faeba ea Khabone ea Premium: E entsoe ka faeba ea khabone ea 3K/6K, moralo oa lakane e tšesaane (≤5mm) bakeng sa ho tenyetseha le ho sebetsoa habonolo, e boloka matla a phahameng a sebopeho.
• Tshebetso e Leka-lekaneng: Karolelano e ntle haholo ea matla-ho-boima (e bobebe ho feta tšepe, matla a phahameng a ho thaepa), tataiso ea faeba e shebaneng le mahlakoreng a mabeli kapa e shebaneng le lehlakore le le leng bakeng sa ho jara mojaro ka tekanyo e leka-lekaneng.
• Ho bonolo ho e sebetsana: Ho bonolo ho seha, ho tjheka le ho laminate; e tsamaellana le di-resin tse tlwaelehileng, e loketse ho bewa ka letsoho le tlhahiso e iketsang.
• E tšoarella ebile e tenyetseha: E hanela mafome, e hanela mongobo, 'me e hanela ho tetebela, e ikamahanya le mefuta e fapaneng ea lits'ebetso tsa ka tlung/kantle.

  Sehlopha sa Tlhaloso	Ntho e Qaqileng	Litekanyetso tse Tloaelehileng le Likhetho tse Ikhethileng
  Litlhaloso tsa Motheo tsa Tekanyo	Botenya	0.5–100mm (e tloaelehileng: 1.2mm, 1.4mm); e tšesaane haholo 0.3–0.8mm (bakeng sa lihlahisoa tsa 3C); botenya bo ikhethileng boa fumaneha
  	Bophara	E tloaelehileng: 50mm, 100mm, 1000mm; e ikgethileng: 50–2000mm
  	Bolelele	Maemo a Tloaelehileng: 50m, 100m (meqolo); e ikhethileng: 2–10m (bakeng sa likarolo tse kholo tsa sebopeho)
  Litlhaloso tsa Faeba le Loha	Mofuta oa Faeba	E Tloaelehileng:1k,1.5k,2k, 3K, 6K, 12K;
  	Boikutlo ba Faeba	Tsela e le 'ngoe (matla a tataiso e le 'ngoe); Tsela e 'meli (e leka-lekaneng 0°/90°, mohlala, ho loha ha twill ka 2×2), Twill/Plain/Ud/Jacquard/Mix Lohelloa/
  	Bophahamo ba Faeba	≥65% (e tloaelehileng bakeng sa liboto tse sebetsang hantle)
  Litlhaloso tsa Thepa ea Mechini	Matla a tšepe	Sekala se akaretsang: ≥2000MPa; Sekala se matla haholo: ≥2400MPa; Sekala sa T800: ho fihlela ho 3000MPa
  	Modulus ea Tensile	140–240GPa (e fapana ho ya ka sehlopha sa faeba)
  	Ho Lelefatsa Nako ea Phomolo	≥1.70% (e tloaelehileng)
  Litlhaloso tsa Resin le Thepa	Mofuta oa Resin	Epoxy (e atileng haholo); Polyester, Vinyl Ester; Resin e hanelang mocheso o phahameng (libaka tse khethehileng)
  	Dikahare tsa Resin	34–42% (e fapana ho ya ka tshebediso)
  	Botenya	1.20–1.80g/cm³ (ho itshetlehile ka karolelano ya faeba/resin)
  Litlhaloso tse Ikhethang tsa Tshebetso	Ho Thibela Lelakabe	UL94 V-0/V-1 (bakeng sa lihlahisoa tsa 3C)
  	Khanyetso ea UV le Ts'enyeho	Maemo a Tloaelehileng bakeng sa lits'ebetso tsa tikoloho ea kantle/e thata
  	Leqephe la ntoa	≤0.8mm (ka hare ho 500mm × 500mm, bakeng sa lihlahisoa tsa 3C tse nepahetseng)

  Melemo

  • Kopanyo ea Botle le Mesebetsi: E kopanya qetello e mebala e boreleli le matla a phahameng a faeba ea khabone, e felisa tlhoko ea ho penta kamora ho penta (e boloka nako le litšenyehelo).
  • Karolelano e Phahameng ea Matla-ho-Boima: E bobebe ho feta tšepe le aluminium, e na le bokgoni bo phahameng ba ho jara mojaro, e loketse dikopo tse amang boima.
  • Ho Tšoarella ha 'Mala: E tsitsitse UV ebile ha e fele, e boloka 'mala o khanyang esita le libakeng tse ka ntle kapa tse thata.
  • Ho Sebetsa Habonolo: E tenyetsehang, e bonolo ho e seha, e tjheka, le ho e laminate; ha ho hlokahale lisebelisoa tse khethehileng, e loketse litsebi le merero ea DIY.
  • Likopo tse Tenyetsehang: E ikamahanya le litlhoko tsa mekhabiso le tsa sebopeho, e loketse liindasteri tse ngata le merero e ikhethileng.

  Likopo

  • Likoloi: Mokhabiso oa kahare, liphanele tsa dashboard, mekhabiso ea 'mele, likarolo tsa mekhabiso ea likoloi tsa mabelo
  • Sefofane: Diphanele tsa kahare tsa difofane, dikarolo tsa mokhabiso (moo boima le botle di leng bohlokwa)
  • Lisebelisoa tsa Lipapali: Liforeimi tsa libaesekele, li-handles tsa sehlopha sa kolofo, li-accents tsa kayak, likarolo tsa mekhabiso ea ski/snowboard
  • Merero ea ho iketsetsa le e ikhethileng: Li-mold tse ikhethileng, liphanele tsa mekhabiso, li-substrate tsa khatiso ea 3D, mesebetsi ea matsoho ea boithabiso
  • Lisebelisoa tsa elektroniki: Likheishene tsa lihlahisoa tsa 3C (lifono, lilaptop), likoahelo tse khabisitsoeng bakeng sa lisebelisoa tsa elektroniki
  • Meaho: Liphanele tsa mekhabiso ea kahare, ho koahela lebota, mekhabiso ea thepa ea ka tlung