DIN335C 90 Degree 3 Flutes HSS Countersink Drill Bit for Chamfering

Boholo: 6.0mm - 25.0mm

Boitsebiso: High Speed ​​Steel

Mofuta oa Flute: 3 Flute

Angle ea ho itšeha: 90 ° (120 °, 60 ° lia fumaneha)

Mofuta oa Shank: Round Shank (Hex Shank, Taper Shank, Tri-Flat Shank e teng)

Qetello ea Bokaholimo: Bosoeu kapa TiN-Coated

Sephutheloana: Sekhechana sa 1 ka Lebokoseng le le leng la polasetiki


Lintlha tsa Sehlahisoa

Litlhaloso

LIKAROLOANA

1. High-Speed ​​Steel (HSS) Kaho: Karolo ena ea ho phunya e entsoe ka tšepe ea lebelo le phahameng, e fanang ka nako e telele haholo, e thibelang mocheso le ho tiea. E khona ho sebetsana le mefuta e mengata ea thepa, ho akarelletsa lehong, polasetiki le litšepe tse bonolo, e leng se etsang hore e sebelisoe haholo.

2. Likoluoa ​​​​tse Tharo: Likoluoa ​​​​tse tharo tse holim'a sekotoana sa boro li thusa ho ntša chip, ho netefatsa hore ho cheka ho sebetsa hamonate le ho sebetsa hantle. Mekolilo e boetse e fokotsa moqoqo le ho thothomela, e leng ho etsang hore ho be le likhaello tse hloekileng.

3. 90-Degree Chamfer Angle: The angle 90-degree angle e lumella ho chesoa ka mokhoa o nepahetseng le ka mokhoa o tsitsitseng, ho etsa liphetho tse hloekileng le tse hloahloa. Sekhutlo sena se nepahetse bakeng sa li-screw tsa countersinking kapa ho theha likheo tsa ho kenya li-flush.

DIN335C HSS countersink (2)
DIN335C HSS countersinks (3)

4. Botebo bo Fetohang: Sebaka sa ho phunya se entsoe ka botebo bo feto-fetohang ba countersink. Sena se o lumella ho laola boholo le botebo ba sebaka sa phomolo, ho amohela boholo bo fapaneng ba screw kapa litlhoko tse ikhethileng tsa projeke.

5. Boholo ba Shank e Tloaelehileng: Sesepa sa ho phunya hangata se tla le boholo bo tloaelehileng ba shank, bo lumellang ho lumellana le li-chucks tse ngata tsa drill le litsamaiso tse fetohang ka potlako. Sena se netefatsa liphetoho tse bonolo le tse sireletsehileng tsa lisebelisoa, ho ntlafatsa katleho ka kakaretso.

6. E Loketse Likopo Tse Sa Tšoaneng: The DIN335C Countersink Drill Bit e ka sebelisoa mefuteng e fapaneng ea lisebelisoa, tse kang ho sebetsa ka mapolanka, ho sebetsa ka tšepe le merero ea DIY. Ho feto-fetoha ha eona ho etsa hore e be sesebelisoa se molemo bakeng sa tšebeliso ea litsebi le ho itlosa bolutu.

7. Ho Nepaha le ho Nepaha: Ho kopanngoa ha 90-degree chamfer angle le li-cuttings tse hlabang holim'a sekoti sa drill ho netefatsa hore ho na le countersinking e nepahetseng le e nepahetseng. Sena se thusa ho theha liphetho tse hloekileng le tsa botsebi.

Melemo

1. Karolo ea boro e loketse ho sebelisoa linthong tse fapaneng, ho kenyelletsa lehong, polasetiki le litšepe tse bonolo. Tekanyetso ena e u lumella ho e sebelisa bakeng sa merero le lits'ebetso tse fapaneng.

2. Setsi sa ho phunya se entsoe ka tšepe ea lebelo le phahameng, e fanang ka boima bo ikhethang, ho tšoarella, le ho hanyetsa mocheso. E khona ho mamella mocheso o phahameng o hlahisoang nakong ea ho cheka 'me e tšoarella nako e telele, ho netefatsa ts'ebetso e ka tšeptjoang le e tšoarellang nako e telele.

3. Likolilo tse tharo tse karolong ea ho cheka li thusa ka ho ntša chip ka katleho, ho thibela ho koala le ho netefatsa hore ho cheka ho sebetsa hantle. Ha ts'ebetso e etsoa ka mokhoa o bonolo, sekontiri se hloekisang se hloekisa, 'me se etsa hore ho be le lintho tse shebahalang eka ke tsa setsebi.

4. The angle chamfer 90-degree e fana ka countersinking e nepahetseng le e tsitsitseng. E loketse bakeng sa ho etsa li-recesses bakeng sa lisebelisoa tsa flush kapa li-screws tsa countersinking, tse hlahisang qetello e hloekileng le e phophomang.

5. Sekhahla sa ho cheka se lumella hore ho be le botebo bo feto-fetohang ba countersink, ho fana ka phetoho ea ho theha likheo tsa boholo bo fapaneng le botebo. Ho ikamahanya le maemo ho etsa hore e tšoanelehe bakeng sa boholo bo fapaneng ba screw le litlhoko tsa projeke.

6. Ka likarolo tsa eona tse hlabang tse hlabang le 90-degree chamfer angle, drill bit e fana ka ho nepahala le ho nepahala ho babatsehang. E u thusa ho fumana liphetho tse tsitsitseng le tsa setsebi ka tšebeliso e 'ngoe le e' ngoe.


  • E fetileng:
  • E 'ngoe:

  • Boholo Ø mm

    Shank (mm)

    Kakaretso ea bolelele (mm)

    6.0

    5

    45

    6.3

    5

    45

    8.0

    5

    50

    8.3

    6

    50

    10.0

    6

    50

    10.4

    6

    50

    12.0

    8

    56

    12.4

    8

    56

    16.0

    10

    60

    16.5

    10

    60

    20.5

    10

    63

    25.0

    10

    67

    Ngola molaetsa wa hao mona mme o re romele wona