boleng bo phahameng Moetsi oa li-drill chuck oa Boima
Likaroloana
1. E na le moralo o matla le kaho ho fana ka ts'oarelo e ntle haholo le botsitso ha o cheka lisebelisoa tse thata.
2. Secure clamping: The drill chuck hangata e na le mochine o sebetsang ka senotlolo o tiisang hore o ts'oara ka mokhoa o sireletsehileng le o thata holim'a karolo ea ho bopa, ho fokotsa kotsi ea ho thella nakong ea ts'ebetso.
3. E etselitsoe ho amohela mefuta e fapaneng ea boholo le mefuta ea ho cheka, e lumellang hore ho be le lisebelisoa tse fapaneng tsa ho cheka.
4. Li-chucks tse boima tse boima li entsoe ka lisebelisoa tsa boleng bo phahameng, tse kang tšepe e thata, ho mamella ho sebelisoa ha boima le ho fana ka ts'ebetso ea nako e telele.
5. The drill chuck e etselitsoe ho kenya le ho tlosoa ka potlako le ho se sebetse, ho fokotsa nako ea ho theoha le ho eketsa tlhahiso.
6. E etselitsoe ho fana ka potoloho e boreleli le e nepahetseng, e hlahisang ho cheka ho nepahetseng le ho ntlafatsa ts'ebetso.
7. Motlakase oa li-drill chuck o ka sebelisoa ka mefuta e mengata ea mechine ea ho phunya, ho kenyelletsa le mefuta e 'meli ea letsoho le e emeng.
8. Li-chucks tse ling tsa boima bo boima li fana ka likarolo tse eketsehileng, tse kang mehlahare e mengata kapa bokhoni ba ho fetola pakeng tsa ts'ebetso ea keyed le keyless, ho eketsa ho feto-fetoha le ts'ebetso ea chuck.
TS'EPISO TS'OANE
Sebaka sa ho Tlanya (mm) | Thaba / Taper | Diameter (mm) | bolelele (mm) | Bolelele bo butsoeng (mm) | Boima (kg) |
0.5-6 | B10 | 32 | 50 | 40 | 0.135 |
0.5-6 | JT1 | 32 | 50 | 40 | 0.135 |
1-10 | B12 | 38 | 61 | 50 | 0.215 |
1-10 | JT2 | 38 | 60 | 50 | 0.215 |
1-10 | 3/8-24UNF | 38 | 60 | 50 | 0.215 |
1-10 | 1/2-20UNF | 38 | 60 | 50 | 0.215 |
1-13 | B16 | 46 | 75 | 61 | 0.42 |
1-13 | JT6 | 46 | 75 | 61 | 0.42 |
1-13 | JT33 | 46 | 75 | 61 | 0.42 |
2-13 | 3/8-24UNF | 44 | 74 | 57 | 0.38 |
2-13 | 1/2-20UNF | 44 | 74 | 57 | 0.38 |
3-16 | B16 | 53 | 87 | 67 | 0.615 |
3-16 | JT6 | 53 | 87 | 67 | 0.615 |
3-16 | B18 | 53 | 95 | 74 | 0.645 |
3-16 | JT3 | 53 | 96 | 75 | 0.645 |
3-16 | 1/2-20UNF | 53 | 87 | 66 | 0.615 |
3-16 | 5/8-16UN | 53 | 87 | 66 | 0.615 |
5-20 | B22 | 64 | 107 | 83 | 1.095 |
5-20 | JT3 | 64 | 107 | 83 | 1.095 |
5-20 | B24 | 79 | 130 | 102 | 2.085 |
5-26 | B24 | 79 | 130 | 102 | 2.085 |