Li-Burr tsa Tungsten Carbide: Temoho ea Tekheniki, Litšebeliso le Melemo

Litlhaloso tsa Tekheniki: Bokgoni ba Boenjiniere

1. Sebopeho sa Thepa
   • Tungsten Carbide (WC): E na le likaroloana tsa tungsten carbide tsa 85–95% tse hokahaneng le cobalt kapa nickel. Sebopeho sena se netefatsa hore ho thatafala ho tšoana le litaemane le ntlha ea ho qhibiliha e fetang 2,800°C.
   • Liaparo: Liaparo tsa titanium nitride (TiN) kapa daemane li eketsa ho hanyetsa ho tsofala le ho fokotsa khohlano.
2. Likarolo tsa Moralo
   • Ho Seha Liphala: E fumaneha ka meralo e sehiloeng ka lesoba le le leng (bakeng sa ho qeta hantle) le e sehiloeng habeli (bakeng sa ho tlosa thepa ka matla).
   • Libopeho: Bolo, silindara, khoune le liprofaele tsa sefate li sebetsana le li-geometri tse rarahaneng.
   • Boholo ba Shank: Li-shank tse tloaelehileng (1/8″ ho isa ho 1/4″) li netefatsa hore lia lumellana le li-drill, li-grinder le mechini ea CNC.
3. Litekanyo tsa Tshebetso
   • Lebelo: E sebetsa ka katleho ho 10,000–30,000 RPM, ho latela boima ba thepa.
   • Khanyetso ea Mocheso: Boloka botsitso mochesong o fihlang ho 600°C, ho fokotsa likotsi tsa ho fetoha ha mocheso.

Likopo ho pholletsa le Liindasteri

Li-burrs tsa tungsten carbide li ipabola mesebetsing ea ho bopa le ho qeta litšepe le metsoako:

1. Lifofane le Likoloi
   • Ho Sebetsa ka ho Sebetsa: Mahare a turbine a boreleli, likarolo tsa enjene, le likarolo tsa lebokose la gearbox.
   • Ho tlosa bolutu: Ho tlosa mathoko a bohale ho tsoa ho aluminum kapa titanium alloys ho thibela ho robeha ha khatello.
2. Bongaka le Meno
   • Lisebelisoa tsa ho Buoa: Ho etsa li-implant tse lumellanang le 'mele le lisebelisoa tsa masapo.
   • Li-prosthetics tsa meno: Ho ntlafatsa meqhaka, marokho le meno a maiketsetso ka ho nepahala ha boemo ba micron.
3. Tlhahiso ea Tšepe
   • Ho Lokisetsa ho Tjhesetsa: Meeli e benyang bakeng sa manonyeletso a ho welding a TIG/MIG.
   • Ho Etsa Die & Hlobo: Ho betla masoba a rarahaneng ka har'a liforomo tsa tšepe tse thata.
4. Mosebetsi oa Patsi le Bonono
   • Ho betla ka botlalo: Ho betla dipaterone tse ntle ka lehong le thata kapa acrylics.
   • Tsosoloso: Ho lokisa thepa ea khale kapa liletsa tsa 'mino.

Melemo ho feta Lisebelisoa tse Tloaelehileng

1. Bophelo bo Atolositsoeng ba Sesebelisoa
   Li-burrs tsa tungsten carbide li feta lisebelisoa tsa tšepe tse lebelo le phahameng (HSS) ka makhetlo a 10-20, e leng se fokotsang nako ea ho sebetsa le litšenyehelo tsa ho nkela sebaka. Ho hanyetsa ha tsona ho khohlano ho netefatsa ts'ebetso e tsitsitseng ea tšepe e sa ruseng, tšepe e lahliloeng le liseramike.
2. Ho nepahala ho Phahameng
   Meeli e bohale ea ho seha e boloka mamello e tiileng (± 0.01 mm), e leng ea bohlokoa bakeng sa likarolo tsa lifofane le lisebelisoa tsa bongaka.
3. Ho feto-fetoha ha maemo
   E lumellana le litšepe, polasetiki, fiberglass, esita le lesapo, li-burrs tsena li felisa tlhoko ea liphetoho tse ngata tsa lisebelisoa.
4. Khanyetso ea Mocheso le Ts'enyeho
   E loketse libaka tse nang le mocheso o phahameng joalo ka libaka tsa ho theha thepa kapa lifeme tsa ho sebetsana le lik'hemik'hale. Mefuta e kopantsoeng le cobalt e hanela oxidation maemong a mongobo.
5. Ho Bokgoni ba Litšenyehelo
   Ho sa tsotellehe litšenyehelo tse phahameng tsa pele, nako ea tsona ea ho phela nako e telele le tlhokomelo e fokotsehileng li fana ka poloko ea nako e telele.

Mekhoa e mecha ea theknoloji ea Carbide Burr

• Likharbide tse nang le sebopeho se senyenyane: Meaho e menyenyane ea lithollo e eketsa ho tiea ha thepa e robehang habonolo joalo ka faeba ea khabone.
• Li-Burrs tse bohlale: Lisebelisoa tse sebelisoang ke IoT tse nang le li-sensor tse kentsoeng li hlahloba ho tsofala ha nako ea sebele, li ntlafatsa mesebetsi ea machining ea CNC.
• Meralo e Sireletsang Tikoloho: Thepa ea carbide e ka sebelisoang hape e tsamaellana le lipheo tsa tlhahiso tse tsitsitseng.

Ho Khetha Carbide Burr e Nepahetseng

1. Boima ba thepa: Sebelisa li-burrs tse sehiloeng hantle bakeng sa tšepe e thatafetseng le tse sehiloeng ka thata bakeng sa litšepe tse bonolo kapa lehong.
2. Mofuta oa Kopo: Khetha dibopeho ho latela mosebetsi—mohlala, di-ball burrs bakeng sa bokahodimo bo kobehileng, di-cone burrs bakeng sa ho tjhesa.
3. Ho lumellana ha Lebelo: Bapisa lintlha tsa RPM le litlhaloso tsa sesebelisoa sa hau ho qoba ho chesa haholo.

Qetello

Li-burrs tsa carbide tsa tungsten ke bahale ba sa rorisoang ba boenjiniere ba ho nepahala, ba koala sekheo pakeng tsa thepa e tala le liphetho tse se nang sekoli. Ho tloha ho etseng likarolo tsa enjene ea jet ho ea ho tsosoloseng li-violin tsa khale, motsoako oa tsona oa ho tšoarella, ho nepahala le ho tenyetseha li etsa hore li be tsa bohlokoa. Ha liindasteri li ntse li sutumelletsa tlhahisong e bohlale le e tala, lisebelisoa tsena li tla tsoela pele ho fetoha—li fana ka bokhoni ba ho potoloha ka nako e le 'ngoe.