Li-Drill Bits tsa Wood Boring: Ho nepahala, Matla, le Ts'ebetso

Likotoana tsa ho cheka lehong li entsoe ka lijeometri tse khethehileng ho hlola mathata a mapolanka. Ho fapana le li-twist bits, lisebelisoa tsena li na le meralo e etselitsoeng morero:

• Brad Point Bits : Sepike se nchocho se bohareng se thibela ho lelera, se pota-potiloe ke lehare le hlabang lijo-thollo tsa lehong bakeng sa masoba a sa tabohang.
• Four-Flute Four-Groove Bits : Lithako tse quadruple le likanale tse tebileng li nolofalletsa ho ntša li-chip ka potlako nakong ea boring e tebileng—e loketseng liloko tsa mamati le lifate tse teteaneng.
• Li-Auger Bits: Bafofisi ba lifofane ba hula karoloana ka har'a lehong, ha liphala tsa spiral li ntša lithupa ka liribone tse sa khaotseng—tse loketseng ho etsa foreimi ea lehong.
• Li-Spade Bits: Li-blade tse bataletseng tse nang le lintlha tse bohareng li phunya masoba a bophara bo boholo ka potlako, leha ho petsoha ka lehlakore ho hloka tšehetso ea sehlabelo.Lethathamo: Papiso ea Mefuta ea Boring Bit ea Wood

  Mofuta oa Bit	Boholo bo tebileng	Lebelo (RPM)	Matla a Sehloho
  Brad Point	75 limilimithara	1,500-3,000	Ho nepahala ha laser, marako a boreleli a khalase
  Folute e Nne	430mm*	1,000-2,000	Boring bo tebileng, 30% e potlakileng ea ho hlakola chip
  Auger	300mm+	500-1,500	Ho iphepa merung e thata
  Hlapa	150 limilimithara	1,000-2,500	Likoti tse kholo tse potlakileng (6-38mm)

  Liphello tsa Boenjiniere: Lisebelisoa le Mechanics

  Metallurgy Innovations

  • Tšepe e Phahameng ea Carbon: E sebelisoa ho li-spade bits tsa FANXI, tse thatafalitsoeng bakeng sa ho hanyetsa ho khoptjoa. Ho roala ha oxide e ntšo ho fokotsa khohlano le ho thibela kutu.
  • Kaho ea Bi-Metal: E kopanya likarolo tse sehang tsa HSS le 'mele ea tšepe ea alloy-e matlafatsa ho tšoarella merung e thata ea tšepe ea Australia.
  • Keletso ea Carbide: Likotoana tsa boemo ba indasteri li na le likarolo tsa brazed carbide bakeng sa li-laminate tse chekang le liboto tse kopaneng ntle le ho phunya.

  Liphiri tsa Geometry

  • Li-Grooves tsa ho Itlhoekisa: Meralo e nang le lekolilo tse 'ne e ntša lichipisi ka lebelo la 40% ho feta likotoana tse tloaelehileng, e thibela ho tlama lehong le metsi.
  • Hex Shanks (6.35mm): Tlosa ho thella ha li-chuck ho bakhanni ba nang le tšusumetso, e leng se nolofalletsang ho fetoha ha letsoho le le leng.
  • Lintlha tse ntlafalitsoeng: Likotoana tsa likharafu tsa IRWIN li sebelisa malebela a atolositsoeng ho fokotsa ho phatloha le 'mele oa parabolic bakeng sa ho itšeha ka mabifi.

  ---

  Ke Hobane'ng ha Litsebi li Khetha Likotoana tse Khethehileng tsa Lehong

  1. Bokhoni bo sa Lekanyetsoang
     Likotoana tse 'nè tsa lekolilo li cheka 30% ka potlako lifateng tse thata ka lebaka la khohlano e fokotsehileng le ejection e tsoelang pele ea chip.
  2. Felisa Boleng bo se nang sekoli
     Brad point spurs e theha masoba a kentsoeng pele, e felisa ho taboha ka plywood ea veneered le MDF-e bohlokoa bakeng sa ho kopanya ho bonahalang.
  3. Taolo e Tebileng e Boring
     Ka botebo ba tlhaho ba 130mm le lithupa tse atolositsoeng tsa 300mm, likotoana tsa li-groove tse 'ne li phunyeletsa maballo a 4 × 4 ka tsela e le' ngoe.
  4. Mefuta-futa ea Lintho Tse Ngata
     Likotoana tse nang le makhapetla a carbide li tšoara metsoako ea lehong-polastiki (WPC), PVC, esita le maqephe a aluminium ntle le ho bōptjoa bocha.
  5. Tool Bophelo bo bolelele
     Li-bi-metal auger bits li nka nako e telele ka 2× ho feta carbon steel merung e hlabang joalo ka teak
• Melemo ea Wood Boring Drill Bits
• (Ho cheka ka mokhoa o nepahetseng.)
• Likotoana tse kang brad - likotoana tsa ho phunya lintlha li etselitsoe ho fana ka ho cheka ho nepahetseng haholo. Sebaka se bohareng sa likotoana tsena se netefatsa hore lesoba le qala hantle moo le reretsoeng, ho fokotsa kotsi ea ho se tsamaisane hantle. Sena se bohlokoa mererong ea ho etsa mapolanka moo ho hlokahalang hore ho behoe mekoti ka nepo, joalo ka ha ho etsoa thepa ea ka tlung kapa ho khabinete. Ka mohlala, ha u etsa letoto la masoba bakeng sa ho kenya li-slide tsa li-drawer, ho sebelisa "brad-point drill bit" ho tla etsa bonnete ba hore li-slide li kenngoa ka ho lekana le ho sebetsa hantle.
  (Ho Fokotseha ha Lehong ho Fokotsa)
  Mefuta e meng ea likotoana tsa lehong tse boring, joalo ka Forstner bits, li etselitsoe ho rema patsi ka tsela e fokotsang ho petsoha. Moralo o bataletseng oa likotoana tsa Forstner le ts'ebetso ea tsona e boreleli e fella ka masoba a hloekileng a mathōko a nang le likhoele tse tabohileng hanyenyane. Sena ke sa bohlokoa ka ho khetheha ha u sebetsa ka mapolanka a thata kapa ha ponahalo ea lesoba e le ea bohlokoa haholo, joalo ka thepa e ntle ea ka tlung kapa mapolanka a khabisitsoeng.
  (Keketso ea Katleho).
  Likotoana tsa ho phunya likharafu, mohlala, li etselitsoe ho etsa masoba a potlakileng - ho etsoa ka lehong. Likarolo tsa tsona tse sehiloeng ka bophara li ka tlosa lehong le lengata ka potlako, tsa u lumella ho phunya masoba kapele ha ho bapisoa le likotoana tse nyane, tse nepahetseng haholoanyane. Sena se etsa hore e be tse loketseng merero eo lebelo e leng ntho e itseng, joalo ka ho phunya masoba a mangata bakeng sa likhoele tsa motlakase morerong oa kaho. Li-drill bits, tse nang le liphala tse telele bakeng sa ho ntša chip ka katleho, li boetse li ntle bakeng sa ho phunya masoba a tebileng ka lehong ka potlako.
  Mefuta-futa
  Mefuta e fapaneng ea likotoana tsa ho cheka lehong tse fumanehang li bolela hore li ka sebelisoa bakeng sa lits'ebetso tse fapaneng. Hore na o ntse o sebetsa morerong o monyane oa DIY lapeng, joalo ka ho kenya raka, kapa mosebetsi o moholo oa ho etsa mapolanka, joalo ka ho aha litepisi tse entsoeng ka mapolanka tse tloaelehileng, ho na le boro ea patsi e boring e loketseng mosebetsi. Mefuta e fapaneng ea likotoana e ka sebelisoa mefuteng e sa tšoaneng ea lehong, ho tloha ho softwoods joaloka phaene ho ea ho hardwoods joaloka maple, esita le linthong tse ling tse entsoeng ka lehong.
  Qetellong, ho utloisisa mefuta e fapaneng ea likotoana tsa ho cheka lehong, likarolo tsa tsona tsa tekheniki, le melemo eo li fanang ka eona ke senotlolo sa katleho ea mapolanka. Ka ho khetha bonyane bo nepahetseng bakeng sa morero oa hau, u ka finyella liphello tse molemo, ho boloka nako, le ho netefatsa ho tšoarella le boleng ba pōpo ea hau ea mapolanka.